CDL Combination Vehicles Practice Test

85 questions for the Class A add-on: rollover and off-tracking, the tractor protection valve, trailer air lines, and coupling a tractor to a semitrailer step by step.

85 questionsEvery answer explained

Practice Mode

85questions

Work through all 85 questions. Stop anytime — your progress is saved.

Exam Simulation

20questions
25min
16/20Passing

Flashcards · try 3

1 / 3

Practice by Category

Work through a whole topic — every question in it.

Sample questions with answers

9 more from the 85-question bank — tap to see the answer

1

At what air pressure must the tractor protection valve operate automatically?

  • Answer: Between 20 and 45 psi
  • Between 70 and 90 psi
  • Between 50 and 65 psi
  • Between 5 and 15 psi

The tractor protection valve must operate automatically when air pressure on the towing vehicle is between 20 and 45 psi.

Source: 49 CFR §393.43

2

Which cab control opens and shuts the tractor protection valve?

  • The trailer hand valve (trolley valve)
  • Answer: The trailer air supply control
  • The foot brake pedal
  • The parking brake control

A control valve in the cab, the trailer air supply control, opens and shuts the tractor protection valve.

Source: CDL Manual §6.2.2

3

When the tractor protection valve closes, what happens to the trailer emergency line?

  • It stays charged, holding the brakes released
  • Its air goes to the service line
  • It is refilled from the trailer air tanks
  • Answer: It is exhausted, applying the trailer emergency brakes

A closed tractor protection valve stops air leaving the tractor and exhausts the trailer emergency line, which brings on the trailer emergency brakes.

Source: CDL Manual §6.2.2

Show 6 more
4

On newer vehicles, what does the trailer air supply control look like?

  • A yellow diamond-shaped knob
  • A black lever on the dash
  • A blue round knob
  • Answer: A red eight-sided knob

Newer vehicles use a red, eight-sided knob as the trailer air supply control.

Source: CDL Manual §6.2.3

5

What happens when you pull out the trailer air supply control?

  • Answer: Trailer air shuts off and its emergency brakes apply
  • The trailer service brakes are applied gradually
  • Only the tractor parking brakes are released
  • Air is supplied to the trailer and its brakes release

Pushing the knob in supplies the trailer with air; pulling it out shuts the air off and puts on the trailer emergency brakes.

Source: CDL Manual §6.2.3

6

The emergency air line is also called the:

  • Signal line
  • Relay line
  • Control line
  • Answer: Supply line

The emergency line is also known as the supply line; control line and signal line are other names for the service line.

Source: CDL Manual §6.2.4

7

A trailer breaks loose and tears the emergency air hose apart. What happens to the trailer?

  • Its service brakes keep working normally
  • Its brakes release and it rolls freely
  • Its air tanks refill from the service line
  • Answer: Its emergency brakes come on

Loss of air pressure in the emergency line makes the trailer emergency brakes come on and also closes the tractor protection valve.

Source: CDL Manual §6.2.4

8

Which color is used to mark the service air line and its glad hand?

  • Yellow
  • Red
  • Green
  • Answer: Blue

Blue is used for service lines and red for emergency (supply) lines.

Source: CDL Manual §6.2.5

9

How are glad hands positioned when you begin connecting them?

  • Seals apart, couplers at a 180 degree angle
  • Seals apart, couplers lined up straight
  • Seals together, couplers at a 45 degree angle
  • Answer: Seals pressed together, couplers at a 90 degree angle

The two rubber seals are pressed together with the couplers at 90 degrees to each other, then the glad hand on the hose is turned to lock them.

Source: CDL Manual §6.2.5

About the CDL Combination Vehicles test

How many questions are on the CDL Combination Vehicles test?

It is a short paper of 20 items and you can miss four. Without it a state may not issue a Group A permit or licence.

Who has to take it?

You need it for a Class A licence (tractor-trailers). It covers rollover and crack-the-whip risk, off-tracking, trailer air brakes and the tractor protection valve, and coupling, uncoupling and inspecting a combination vehicle.

Is there a time limit?

Federal rules don't set one and states differ, many give no fixed limit. Our mock uses 25 minutes so you practise working at a steady pace.

Are these the real test questions?

No. States draw from question pools that the FMCSA approves and does not publish. Every question here was written by GoExam from the facts in the commercial driver's manual and the federal regulations in 49 CFR, and shows its source. A second reviewer answered each one without seeing our key; questions where the answers differed were dropped. Where the manual and the current regulation disagree, we don't ask about it.

Do I need a learner's permit first?

Yes. You pass the knowledge tests to get a Commercial Learner's Permit (CLP), and can take the skills test no sooner than 14 days after the CLP is first issued (49 CFR 383.25). Since February 7, 2022 you must also finish entry-level driver training from a registered provider before your first Class A or B skills test, your first P or S skills test, or your first H knowledge test (49 CFR 383.71).

Can I get a Class A without passing this test?

No. Under 49 CFR 383.135(a)(3) an applicant who fails the combination vehicle test must not be issued a Group A CLP or CDL.

Questions written by GoExam from the commercial driver's license manual and the Federal Motor Carrier Safety Regulations (49 CFR). They are not official test questions. 49 CFR Part 383 (eCFR)

Other licence classes

Other exams in United States